Flex FX5131 Manual Del Operador página 8

TO ATTACH/DETACH BATTERY PACK (FIG. 2)
a. To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
b. To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
MOUNTING THE FLOOD LIGHT TO THE
WALL (FIG. 3)
Your tool is equipped with a pair of hanging
holes for convenient storage.
a. Install screws in the wall 5-9/32 in (134mm)
apart. Use screws sufficiently strong to hold
the combined weight of the flood light and
battery pack.
b. Align the hanging holes with these two
screws, hang the flood light onto them.
WARNING
Unsecured flood light may fall resulting in
personal injuries and/or property damage.
MOUNTING THE FLOOD LIGHT TO A TRIPOD
(NOT INCLUDED)
Choose a suitable tripod with 5/8" screw, thread
the 5/8" screw into the tripod mounting hole on
the flood light (Fig. 4).
WARNING
tripod. Unsecured flood light may fall resulting
in personal injuries and/or property damage.
Ensure the flood light is
firmly secured in place.
Ensure the flood light is
securely mounted on your
ASSEMBLY
Fig. 2
Detach
Battery-Release
Button
Fig. 3
Fig. 4
-8-
Attach
Hanging Holes
Tripod mounting hole
5/8"(15.8mm)