Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
17. Align shelf end hardware with the mark & screw hole locations.
18. Secure shelf end hardware using #8 1/2 in. screws (used for tower top
locations only).
19. Secure wall anchors if no stud is present at tower bracket hole locations.
20. Place tower & shelf onto hardware.
21. Secure tower brackets using #8 1 1/2 in. screws.
22. Secure shelf ends & L-clips using #4 3/4 in. screws at all locations.
STEP 6 - Installing Lower Shelf
On the lower level line space shelf mounting L-clip hardware equidistant in
the following manner:
•
3 L-clip hardware within the 48in. shelf location
1.
Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
2.
Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
3.
Repeat for remaining L-clip locations.
4.
Double check shelf measurements (cut shelf & bar if required).
5.
Place a shelf end onto the wall end of the shelf.
6.
Place shelf onto L-clips.
7.
Level shelf front to back & mark shelf end hardware location on wall.
8.
Place shelf end hardware on opposite end of shelf.
9.
Level shelf front to back & mark shelf end hardware location on tower side.
10. Remove shelf.
6
Publicidad
Tabla de contenido
