Disposal; Spare Parts - Calpeda MÈTA Instrucciones De Uso

www.motralec.com / service-commercial@motralec.com / 01.39.97.65.10
9.4. Dismantling the pump
OFF
Close the suction and delivery gate valves and drain
the pump casing before dismantling the pump (par. 14
fig. 5).

10. DISPOSAL

OFF
The final disposal of the device must be done by
specialized company.
Make sure the specialized company follows the
classification of the material parts for the separation.
Observe the local regulations and dispose the device
accordingly with the international rules for environment
protection.

11. SPARE PARTS

11.1. Spare-parts request
When ordering spare parts, please quote their
designation, position number in the cross section
drawing and rated data from the pump name plate
(type, date and serial number).
The spare parts request shall be sent to CALPEDA
S.p.A. by phone, fax, e-mail.
11.2. DESIGNATION OF PARTS
Nr. Designation
14.00 Pump casing
14.04 Plug
14.06 O-ring
14.12 Plug
14.16 O-ring
14.20 O-ring
14.24 Screw
14.47 O-ring
14.64 Valve, set
14.66 Washer / Retaining ring
16.00 Suction casing
16.14 Plunger
16.15 Spring
16.16 O-ring
16.17 Valve
17.00 Membrane
17.04 Valve casing
17.06 Nut
17.08 Valve casing plug
17.10 Tank cover
20.00 Delivery casing
22.00 Ejector
22.12 O-ring
22.16 O-ring
25.01 First stage casing
25.02 Stage casing (complete)
25.05 Last stage casing
25.10 Washer for missing impeller
25.11 First stage spacer
26.00 Diffuser
26.06 O-ring
28.00 Impeller
28.04 Impeller nut
28.08 Washer
28.12 Circlip
34.00 Casing cover
36.00 Mechanical seal
META Rev1-1 - Operating Instructions
European Directive
2012/19/EU (WEEE)
36.51 Retaining ring, split
36.52 Shoulder ring
36.54 Spacer sleeve
46.00 Deflector
64.13 Spacer sleeve
64.15 Spacer sleeve
70.00 Lantern bracket
73.00 Ball bearing
76.00 Motor casing with winding
76.06 Nut
76.16 Support
76.54 Terminal box, set
78.00 Shaft with rotor packet
81.00 Ball bearing
82.00 Motor end shield
82.04 Compensating spring
88.00 Motor fan
90.00 Fan cover
90.04 Screw
92.00 Tie-bolt
96.02 Cable with plug
98.00 Terminal box cover
98.04 Screw
98.08 Gasket
98.20 Screw
98.51 Transducer
98.52 Signals cable
98.54 Display cable
98.60 Control board + Input signal board
98.63 Power board
98.55 Terminal box cover / board
98.70 Screw
EN
Page 17 / 80