SIOUX A Serie Instrucciones página 2

WARNING
DISCONNECT TOOL FROM AIR SUPPLY
BEFORE MAKING ANY ADJUSTMENTS!
OUTPUT CONTROL
FOR STRAIGHT AND PISTOL TYPES
1. Remove the 1/8" plug from the front case.
2. Turn the spindle manually until the adjusting screw comes
in line with the hole.
3. Turn the adjusting screw with the hex wrench provided.
Turn the screw clockwise to increase torque and counter-
clockwise to decrease torque.
4. Reinstall the 1/8" plug.
5. Test wrench for desired output.
6. Repeat steps 1 to 5 as necessary.
STRAIGHT AND PISTOL TYPES
Front Case
Spindle
Torque
Decrease
Torque
Increase
*Sound Pressure
Catalog No. dBA
SPW-440D-3 75
SPW-550D-3 79
SPW-660D-4 79
SPW-660D-40 79
SPW-770D-3 82
SPW-440-3 75
SPW-550-3 79
SPW-660-4 79
SPW-770-3 82
SPW-880-4 83
SPW-990-3 83
*per PN8NTC1
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
SPW-440D-3, SPW-550D-3, SPW-660D-4, SPW-660D-40, SPW-770D-3, SPW-440-3, SPW-550-3,
SPW-660-4, SPW-770-3, SPW-880-4, SPW-990-3, SPW-1110-1, SPW-1330-1, SPW-440SD-1, SPW-550SD-1, SPW-660SD-1,
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
July 1, 2003
Murphy, North Carolina, USA
Date and place of issues
Adjusting Screw
Plug (1/8")
SOUND AND VIBRATION READINGS
*Vibration
m/s 2
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
Less than 2.5
*per ISO 8662
DECLARATION OF CONFORMITY
SPW-440S-1, SPW-550S-1, SPW-660S-1, SPW-770S-1, SPW-770SC-1.
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer
FOR ANGLE TYPE
1. Remove the front case from the tool.
2. Remove the cylinder case assembly from the front case.
3. Turn the adjusting screw with the hex wrench provided.
Turn the screw clockwise to increase torque and counter-
clockwise to decrease torque.
4. Install the cylinder case assembly in the front case
5. Install the front case on the tool.
6. Test wrench for desired output.
7. Repeat steps 1 to 6 as necessary.
ANGLE TYPE
Front Case
Torque
Decrease
Torque
Increase
*Sound Pressure
Catalog No.
SPW-1110-1
SPW-1330-1
SPW-440SD-1
SPW-550SD-1
SPW-660SD-1
SPW-440S-1
SPW-550S-1
SPW-660S-1
SPW-770S-1
SPW-770SC-1
*per PN8NTC1
Signature of issuer
2
M4 x 12 (3)
Cylinder Case
Assembly
Adjusting Screw
Cylinder Case
Assembly
*Vibration
dBA m/s 2
84 Less than 2.5
84 Less than 2.5
77 Less than 2.5
80 Less than 2.5
83 Less than 2.5
77 Less than 2.5
80 Less than 2.5
83 Less than 2.5
84 Less than 2.5
83 Less than 2.5
*per ISO 8662