Configuration - PNI SafeHouse HS600 Manual De Usuario

Configuration

Power the control unit
Connect the power adapter in the package to the 5V micro USB port and
move the backup battery switch to the "ON" position.
WiFi communication through the integrated module
If your system is configured to report alarms and accept remote control via
the mobile application, the wireless router the alarm system is connected to
must always be on and connected to the Internet.
GSM/4G WiFi communication through the integrated module
If your system is set up to report alarms, receive settings via SMS, or make
voice calls, make sure a SIM card is installed (see image below) and the control
panel is connected to the GSM/4G network. Disable the PIN to the SIM card
before adding it into the unit.
Add and configure phone numbers
You can set up to 5 phone numbers that will receive alarm notifications via
SMS or voice call.
• In the menu go to: Phone -> 1st Phone, 2nd Phone, 3rd Phone, 4th
Phone, 5th Phone
• Press the key ↑ to select the first option where you can input the phone
number (maximum 18 digits) using the numeric keypad
17
English