User's Manual - Epson SR-610 Manual Del Usuario

English
Be sure to push the plug of the power cable all the way into the AC inlet of this
product.
Always unplug the power cable from the power outlet before unplugging it
from the AC inlet of this product.
When disconnecting the power cable, hold the plug firmly. Do not tug on the
cable itself.
Do not connect the cables in ways other than those specified in this manual.
Different connections may cause equipment damage or fire.
Make sure that the total power requirements of all devices receiving power
from this product do not exceed the power limitation. Otherwise, the product
may become damaged.
Be sure to use this product with the rear cover attached. If it is not attached,
foreign objects may enter this product, causing fire or equipment damage.
Do not use the unit in locations subject to high humidity or dust levels. Excessive
humidity and dust may cause paper jams and other problems, such as fire, or
electric shock.
Be careful when transporting, opening, and incinerating the package. You
may cut your finger on the edge of the cardboard.
Never hold this product by the rear cover, the LCD, the POS keyboard, or the
MSR. The product may break and fall onto the floor, causing possible injury.
Be sure to set this product on a firm, stable, horizontal surface. The product may
break or cause injury if it falls.
Never clean the product with alcohol, benzine, thinner, or other such solvent.
Doing so may damage or break parts made of plastic or rubber.
To ensure safety, unplug this product before leaving it for an extended period.
Do not stand on or place heavy objects on top of this product. Equipment may
fall or collapse, causing breakage and possible injury.
Do not drop, bump, or otherwise subject this product to strong vibration or
impact. The glass of the LCD may break and cause possible injury, or the
product may become damaged.
Do not place anything on the LCD screen and do not let anything contact it.
Doing so may leave a trace on the screen.
Do not attempt to adjust the angle of the LCD with the front key inserted in the
front cover lock. Doing so may break the front cover lock.
Do not use excessive force to rotate the customer display or to change the
angle of it. Doing so may break the customer display or the support.
Do not use magnetic stripe cards that are chipped, cracked, dirty, wet, or have
foreign matter stuck to them. Doing so may break the MSR or damage its
mechanical functions.
Do not use aerosol sprayers containing flammable gas inside or around this
product. Doing so may cause fire.
If you use a LAN cable, be sure to use a shielded one.
Notes:
Be sure to use Epson supplied DIMMs, HDDs, and CPUs.
Be sure to use PCI boards for which Epson has verified the operation. Contact your dealer
for the list of PCI boards whose operation is verified. If you use other PCI boards, carry out
a thorough verification on your own responsibility before use.
To install commercially available applications, consult your dealer.
SR-610 User's Manual 5