Adjusting The Direction - Epson SR-610 Manual Del Usuario

Operating the Customer Display
Be sure that the power switch of the customer display is always on. (See B 20.)

Adjusting the Direction

You can change the direction and angle of the display of the customer display by
moving it slowly as you hold down the pole. Adjust the customer display to a
position easy for customers to view. See Illustration N.
CAUTION:
Do not rotate the customer display with excessive force. Doing so may break it.
The mobile range of the display is as follows.
❏
Display rotation: Maximum angle of 90° (45° each to left and right.)
Display tilt
❏
Maximum angle of 48° (4 levels, 5 positions)
Operating the Key Lock key - 60 POS Keyboard Unit
A set of Key Lock keys is provided for the 60 POS keyboard. When the key position
is on OFF, no data can be entered. Each key can be given a different access range to
prevent use of higher functions by unauthorized users. See Illustration O.
Note:
Use application software to set up the Key Lock key.
Inserting and Removing CompactFlash Cards
When connecting a CompactFlash adapter, confirm that [Boot Setting
Configuration] - [Onboard Compact Flash] for the BIOS is Disabled. If it is
Enabled the system does not start.
CAUTION:
Turn the power switch off before inserting or removing a CompactFlash card.
Do not insert or remove the card when power is on or when the device is in
sleep/standby mode.
Follow the procedure below to insert a CompactFlash card.
1. Slightly lift the back side of the SR-610.
2. Make sure the compactFlash card surface is facing up and press it into the
CompactFlash adapter until you hear a click. See Illustration P.
Follow the procedure below to remove the CompactFlash card.
1. Slightly lift the back side of the SR-610.
2. Press the eject button. See Illustration Q.
The CompactFlash card will be ejected forward. Grasp and remove.
English
SR-610 User's Manual 9