Line In; Earphone Jack; External Speaker Jack; Internal Speaker On/Off Switch - Bigben Interactive TD101 Instrucciones De Funcionamiento

Idiomas disponibles

Make sure to match the socket colors with the jack colors.

2. Connect the unit's power cord to the household outlet. Also, power on your amplifier

device and adjust its volume level.

Line In

4. Rotate the POWER/VOLUME knob clockwise until hear a "click" sound to turn on the

unit.

5. Select LINE IN by turning the FUNCTION SELECTOR KNOB.

6. Connect the RCA line out jacks to auxiliary input sockets of your home amplifier

device. Make sure to match the socket colors with the jack colors.

To listen music from earphone/headphone, connect your earphone/headphone into

the earphone jack.

To play with external speakers, connect the external speaker wires to the external

speaker jack, which locate at the back of the unit

To select playback from internal speaker, slide the switch to "On" position.

WARNING! Risk of hearing damage

• Set a low volume on the playback device before you connect the headphones to

the sound source.

• Avoid excessive volumes, particularly over extended periods or in the case of

frequent use. Excessive volume can result in permanent hearing damage.

Re-mark :

ERP2 mode: When the unit does not receive any Audio signal from Phono and

Line-in in around 10 minutes, the unit will automatically enter standby mode. In

order to re-activate the unit, please turn off the unit and turn on again to resume

normal operation.

Tabla de Contenido