Important Information - Smarttech SMART Mobile Stand FSSBID Información Importante

Important Information

WARNING
• Failure to follow the installation instructions included with your SMART Mobile Stand for Interactive Displays
could result in personal injury or damage to your product. Make sure that you properly engage and secure the vertical
brackets both to your flat-panel display and to your SMART Mobile Stand.
• Read the safety warnings, precautions and other important information contained in the documentation included
with your other SMART products and published by your flat-panel display's manufacturer.
• Two people are required to safely assemble your SMART Mobile Stand and to mount or remove your flat-panel display
and your SMART Board™ for Flat-Panel Displays interactive overlay.
• Lock the casters before installing or working with your flat-panel display on your SMART Mobile Stand,
or adjusting its height.
• To prevent injury, be aware of crush and pinch locations on the product (marked with the crush symbol)
during assembly and use. Do not rest your hand on the stand's universal mount or under the interactive
product's pen tray or pencil ledge while adjusting the height of your SMART Mobile Stand.
• Use the SMART Mobile Stand's three grab bars to move the unit. Do not press, pull or push
on the flat-panel display, interactive overlay or display frame, cabinet, doors, rear plastics or vertical brackets.
• Before moving your SMART Mobile Stand, make sure that the casters are unlocked. These casters are
designed to roll on common indoor surfaces. While you move the unit, your view may be partially obstructed.
Be aware of surrounding obstacles.
• Do not move your SMART Mobile Stand while external cables are connected or when the power is on.
• Ensure that any cables extending across the floor to your SMART Mobile Stand are properly bundled and marked
to prevent a tripping hazard.
• Do not stand (or allow children to stand) on a chair to touch the surface of your flat-panel display. Instead, rotate
your SMART Mobile Stand's height-adjustment handle to lower your display to the appropriate height.
• Do not climb or ride (or allow children to climb or ride) on your SMART Mobile Stand. Climbing or riding
on your SMART Mobile Stand could result in personal injury or product damage.
• To reduce the risk of fire or electric shock, do not expose your SMART Mobile Stand to rain or moisture.
CAUTION
• Make sure that the weight of your flat-panel display does not exceed 130 lb. (59 kg) with a maximum depth of
6 1/2" (16.5 cm), or 160 lb. (72.6 kg) with a maximum depth of 3 7/8" (9.9 cm). For a list of flat-panel displays supported
by your SMART Mobile Stand, see smarttech.com/SupportedPanels.
• To prevent damage to a 65" (165.1 cm) flat-panel display when it is installed with a SMART Board for Flat-Panel Displays
interactive overlay, make sure that you install the included clevis pin as instructed in the SMART Mobile Stand for
Interactive Displays Installation and Integration Guide,
• Do not suspend additional objects from, or add any extra weight or excessive pressure to, your SMART Mobile
Stand's brackets (other than the products indicated in the SMART Mobile Stand for Interactive Displays
Installation and Integration Guide,
brackets to support only the combined weight of a flat-panel display and interactive overlay or display frame,
and optional laptop shelf, during normal use. Any other weight hung from these brackets may cause the stand to tip.
• Your SMART Mobile Stand is designed for standard ramp access. Moving your unit up or down a ramp with a steep incline
may cause your SMART Mobile Stand to tip.
1025836 Rev 02
document 170789
document 170789 at smarttech.com/support). SMART designed these
at smarttech.com/support.