Smarttech SMART Mobile Stand FSSBID Información Importante página 4

4 | I M P O R T A NT I N F O R M AT I O N
• Never operate your SMART Mobile Stand immediately after moving it from a cold location to a warm location.
Allow the unit to stabilize to room temperature before operation to prevent possible product damage.
The operating temperature range is from 41°F to 84°F (5°C to 29°C) with up to 80% relative humidity, non-condensing.
The shipping and storage temperature range is from 14°F to 95°F (-10°C to 35°C).
• Do not place your SMART Mobile Stand in hot locations, such as near heating equipment.
• Do not block the ventilation slots and openings on your SMART Mobile Stand. Blocking these openings could cause
overheating and damage to the unit.
• When transporting your unit, repack it with as much of the original packaging as possible. This packaging was designed
with optimal shock and vibration protection.
• Do not attempt to service your SMART Mobile Stand. Only an authorized service provider should service
your SMART Mobile Stand.
NOTE: Cautions, warnings and other important product information are contained in the SMART Mobile Stand for Interactive Displays
Installation and Integration Guide, document 170789 at smarttech.com/support.
1025836 Rev 02