Publicidad
Idiomas disponibles
Idiomas disponibles
English
Wall fixing:
Mark the location on the wall (at least 25 cm from the
floor), having first measured the distance between the
slots. (Fig. 2).
Drill the holes in the wall over the marks made and screw
the plastic supports to the wall. (Fig. 3)
Fix the plastic stands to the rear of the appliance (Fig. 4)
Mount the appliance on the supports.
Caution: Remove the legs with castors if you are going to
mount the appliance on the wall.
Use:
The appliance may give off a small amount of smoke and/
or odour the first time you use it. This is perfectly normal
and will disappear after a few seconds.
- Fully unroll the appliance's power cable before each use.
- Make sure that the appliance is properly assembled.
- Connect the appliance to the mains.
- Set the ON switch in the desired position, after which the
ON pilot light will come on.
PRMB 1600: I = 600 W
II = 1000 W
III = 1600 W
PRMB 2400 : I = 1000 W
II = 1400 W
III = 2400 W
- Rotate the thermostat to select the desired temperature.
- When the desired temperature is reached, the apparatus
will switch off automatically.
- If temperature in the room drops, the appliance will
switch on again automatically.
Spécifications :
Maximum power
Intermediate power
Minimum power
Treated surface
Protection against electric shock
Voltage
Frequency
Product dimensions (W x H x D)
oduct weight
Please note: appliances may be updated and therefore may have elements that are different from those shown although
this does not affect the indications given in this manual.
It is possible that there may be slight differences between the products and the photographs.
Keep this manual in a safe place for future reference.
Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer's liability null and
void.
Cleaning
Make sure that the appliance is switched off and allow it to
cool down before undertaking any cleaning task.
Never clean the appliance while it is in operation, or use
abrasive products.
Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
Never submerge the appliance in water or any other liquid
or place it under running water.
If the appliance is not completely clean its surface may
become degraded, affecting its useful life, and may beco-
me dangerous to use.
NB: If you switch the appliance on after long periods of
inactivity it may emit a small amount of smoke. This is
perfectly normal and is caused by the combustion of lef-
tover accumulated dust particles. This phenomenon may
be prevented by cleaning the appliance before using it.
Anomalies and repair
If the appliance does not work properly or anomalies
occur, do not attempt to disassemble the appliance
yourself due to the risk of accident, which would also
void the warranty.
Check with our aftersales service using the contact
details indicated on the guarantee or contact your
distributor.
The manufacturer shall not be responsible in the event of
damage caused to people or objects as a result of failure
to follow the indications in this manual.
Unit
PRMB 1600
W
1600
W
1000
W
600
m²
16
Class I
V
220-240
Hz
~50
Cm
73,5 x 53,5 x 20
Kg
6,9
PRMB 2400
2400
1400
1000
24
Class I
220-240
~50
84 x 53.5 x 20
7,7
Publicidad
