Product Description - OKBABY 10+ Manual Del Usuario

Non stirare.
2) La riparazione del seggiolino e la sostituzione di componenti
danneggiati deve essere eseguita esclusivamente da personale
autorizzato.
Dati tecnici
Prodotto Seggiolino da bicicletta per bambini
OKBABY mod. 10+
Dimensioni 41x58x70 CM (LxPxH)
Peso 3,7Kg
Accessori optional
• Blocco di fissaggio n. 37490000
Il braccio di supporto non è corredato al blocco di fissaggio.
Diametro tubo canotto da 28 a 40 mm
• Braccio di supporto:
n. 37430000 n. 37430200
telai bici telai bici con
standard inclinazione
posteriore
Conformità e produttore
Prodotto in conformità con la Normativa Europea EN14344.
Produttore:
OKBABY srl, Via del Lavoro 26, 24060 Telgate (BG) Italy.
+39 035 830004 - okbaby@okbaby.it - www.okbaby.it
6 Seggiolino posteriore 10+
n. 37430100 n. 37430700
telai bici con telai bici piccoli
inclinazione per bici da
anteriore donna
Rear mounted child bike seat
EN
OKBABY 10 +
Read the instructions and keep them for future reference.
Follow and comply with the safety precautions!
Make sure you know how to mount and use the 10+ child seat
before using it.

Product description

10+ is a rear seat that is mounted on the bicycle frame seat tube
with a round section diameter of between 28 and 40mm. 10+ is
suitable for use by children with a minimum age of 9 months up to
a maximum weight of 22 kg. The child must be able to sit indepen-
dently, at least for the duration of the ride. 10+ can also be mount-
ed on pedelecs. It must not be mounted on any other two-wheeled
vehicles such as scooters, mopeds, motor-cycles, etc.
Product overview
1 Seat
2 Padding
3 Safety belts
4 Footrest with relative strap and adjusting pin
5 Support arm with guide plate
6 Reflector
7 Metal U-bolts
8 Fastening block
9 Bag of accessories containing 4 M6x70 screws, 4 washers
and an Allen key
10 Locking pin
11 Block tightening wrenches
12 U-bolt supports
Important safety information
1) The seat must be mounted behind the rider, on the frame's seat
tube, as shown in the instructions in this manual. Do not tighten
the screws excessively and check the tightness periodically.
2) Check that the bicycle is suitable for adding supplementary
loads. Check the information supplied with the bicycle or ask for
information and advice from the bicycle manufacturer.
3) Adjust the seat and its components in order to give the child
Rear child's seat 10+ 7