Radio; Searching For Stations Automatically - Automatic Tuning; Tuning In By Adjusting The Frequency; Manual Tuning - Sony XR-1100 Manual De Instrucciones

Radio

Searching for stations
automatically
— Automatic tuning
1
Select the desired band.
A MEM
TUNER
2
Press either side of the SEEK/MANU
button momentarily to search for the
next station (automatic tuning).
GB
SEEK
MANU
The scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
When an FM stereo programme with a sufficient
signal strength is tuned in,
the "STEREO" indication will appear.
To avoid the automatic tuning from stopping on
stations too frequently, press the LOCAL button
momentarily to get the "LCL" indication (local
seek mode).
Only the stations with relatively strong signals will
be tuned in. The local seek mode functions only
when the automatic tuning is in operation.
8
FM1 t FM2 t AM t FM1
For higher
frequencies
For lower
frequencies
Tuning in by adjusting the
frequency

— Manual tuning

1
Select the desired band.
A MEM
FM1 t FM2 t AM t FM1
TUNER
2
Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
For higher
frequencies
SEEK
MANU
For lower
frequencies
PREVENT ACCIDENTS!
While driving, use the automatic tuning and
the memory preset tuning instead of the
manual tuning.
Memorising stations
automatically

— Automatic memory function

Stations with the clearest reception are
automatically searched and memorised on
each band (FM1, FM2 and AM). Up to 6
stations on each band can be stored on the
preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band.
A MEM
FM1 t FM2 t AM t FM1
TUNER
2
Press the TUNER/A MEM button for more
than two seconds.
A MEM
TUNER
The unit will start scanning the selected
band and automatically memorise the
tuned stations on the preset number button
1 through 6.