Stop Watch Function - TFA 38.2029 Instrucciones Para El Manejo

TFA_No. 38.2029 Anleitung_04_15
Stop watch
• Press the MODE button to confirm the settings.
• The current time and the alarm symbol appear
on the display and the symbol of the day-of-the-
week is highlighted.
• When the alarm time is reached, the alarm will
ring.
• If the alarm is not stopped with the LAP/RESET
button, the alarm sound will automatically turn
off after a few seconds and will be reactivated at
the same time.
• Press the START/STOP button and the snooze
function will be activated. The alarm sound will
be reactivated after 5 minutes.
• Press the LAP/RESET and the START/STOP buttons
at the same time to activate/turn off the alarm
function.
• The alarm symbol appears/disappears on the dis-
play.
• Press the LAP/RESET button in normal mode to
change between the time and the alarm time.
5.3 Setting of the hourly chime
• Press and hold the LAP/RESET button in normal
mode.
• The adjusted alarm time appears on the display.
• Press the MODE button at the same time to acti-
vate the hourly chime.
• Black bars appear under the symbols of the day-
of-the-week.
• The hourly chime is now activated.
• Press and hold the LAP/RESET button and press
the MODE button at the same time to deactivate
the function.
• The black bars disappear.
12
02.04.2015 14:52 Uhr
Stop watch

5.4 Stop watch function

• Press the MODE button in normal mode to enter
the stop watch mode. In the stop watch mode
the black bars are flashing.
• With the START/STOP button you can start and
stop the countdown.
• Press the LAP/RESET button to clear the count-
down.
• The total countdown will be 29 minutes and
59,99 seconds and the indication of the counted
time will be in 100th of a second interval.
• After the first 30 minutes the clock will
automatically switch to one second increment.
• After that, the smallest unit will no longer be
100th of seconds but only full seconds.
5.4.1 Split time measurement
• Press the START/STOP button to activate the
stopwatch. Press the LAP/RESET button and the
elapsed time will be displayed. The stop watch is
running in the background and by pressing the
LAP/RESET button again, the current time
appears on the display. With this function, it is
possible to measure any number of split times
from the start.
5.4.2 Storing the split time
• Start the stop watch with the START/STOP but-
ton. Once the first runner finishes the race, press
the LAP/RESET button and with the second run-
ner the START/STOP button. On the display you
can read the time of the first runner and by
pressing the LAP/RESET button the time of the
second runner. Press the LAP/RESET button again
to clear the values.
Seite 7
13