Problem Solving - Skymsen RQC Manual De Instrucciones

7. PROBLEM SOLVING

PROBLEMS
- The appliance doesn´t turn on.
- The appliance turns on, but
when putting the product in
the appliance, it turns in low
rotation.
- The product that was sliced is
stuck inside the appliance.
- Burn and smoke smell.
- Irregular cut.
- Damaged electrical cable.
- Awkward noise.
CAUSES
- Wrong activation procedure.
- Motor thermal protector is working.
- The feeding nozle is open;
- Problem in the internal or external eletrical
circuit of the appliance;
- Power shortage.
- Problems with the Electric Motor.
- Obstructed outlet nozzle.
- Problem in the internal or external electric
circuit of the appliance.
- The blade lost the cut.
- Problems with the transportation of the
appliance.
- Problems with bearing.
SOLUTIONS
- Read the item 4.1 – Activation;
- Wait for some minutes and try again;
- Close the feeding nozzle;
- Call the Authorized Technical
Assistance;
- Check if there is electric power.
- Call the Authorized Technical
Assistance.
- Clear the Outlet Nozzle.
- Call the Authorized Technical
Assistance.
- Sharp the Blades.
- Call the Authorized Technical
Assistance.
- Call the Authorized Technical
Assistance.