IMPORTANT NOTE
• Before and during installation, please read and familiarize yourself with all installation instructions for this product.
• Please keep all components, parts and accessories of this product away from small children and minors. During installation,
all screws,tools and small parts should be supervised so that they do not fall into the hands of children.
• Use caution at all times when installing this product. Please ensure that you are physically able to perform all parts of the
installation and that you have the correct tools and equipment needed.
• Before beginning,remove all wrappers and packinging materials including staples and packing straps.
• Please check to ensure that all components and parts are complete.
• The Filter Gasket (# 3) must be installed to protect against incoming dirt by pipework. Incoming dirt can impair the function
and/or lead to damages on functional parts of the fixture. Manufacturer will not be held liable for resulting damages.
• The O Ring Gasket (# 9) must be installed to prevent water leakage. Manufacturer will not be responsible or liable from
any damage which results directly or indirectly from failure to installation of the O Ring Gasket.
RECOMMENDED TOOLS FOR INSTALLATION
-
+
PH
Screwdriver
24 mm /30mm
Wrenches
PARTS LIST
NO.
Description
Shower Panel Casing
1
2
Shower Head
3
Filter Gasket
Shower Arm
4
5
Screw
Rubber Washer( 5/8")
6
Nut
7
8
Rubber Washer( 1-1/2")
O Ring Gasket
9
Handshower Cradle Assembly
10
11
Handshower Hose
Full Brass Handshower
12
Positioning and Support Brackets
13
Elbow Connector
14
Brass extender joint (1-7/8"&2-3/4"x1/2")
15
Silicone
Pliers
- 3 -
Level
Vice
Pencil / Hexagon-wrench
Sealing Tape
2.5 mm
Qty
1 Set
1 Pc
3 Pcs
1 Set
1 Pc
1 Pc
3 Pcs
3 Pcs
3 Pcs
1 Set
1 Set
1 Pc
1 Pc
1Set
2 Pcs