Insignia NS-MG1344 Guia Del Usuario página 11

HIGH-GLOSS BLACK METAL AND GLASS TV STAND
Step 7: Install the shelf clips.
1 Loosen the white plastic screws in the two glass clips (M) until the screws are almost all the way out of the clips.
2 Push the two glass clips (M) into the holes in the back panel (I). Make sure that the beveled edges of the glass
clips face up and the plastic screws inside the clips face down.
3 Use a Phillips screwdriver to turn the screw inside each glass shelf clip (M) 90° clockwise to lock the clips to the
legs.
Caution: Do not over tighten the glass shelf clip screws
You'll need:
M (2)
www.insigniaproducts.com
Plastic
screw
Beveled
edges
Plastic
screw
Phillips screwdriver
11