Technical Data; Unpacking - Surtek HL720 Manual De Usuario Y Garantía

1
6
2
4
1. HANDLE.
2. GUN TRIGGER HOLDER.
3. HOSE HOLDER.
4. WHEELS.
5. WATER OUTLET.
6. GUN.
7. ADJUSTABLE LANCE.
8. TURBO LANCE.
9. SOAP DEPOSIT GRADA.

TECHNICAL DATA

HL720
VOLTAJE-FRECUENCY
POWER
POWER CONSUMPTION
MAXIMUM PRESSURE
NOMINAL OUTPUT PRESSURE
MAXIMUM INLET FLOW
MINIMUM INLET FLOW
OUTPUT FLOW
MAXIMUM TEMPERATURE OF
THE WATER
HOSE
POWER CABLE
CONDUCTOR
PROTECTION
OVERALL SIZE
WORK CYCLE
WORK HOURS PER DAY
WEIGHT

UNPACKING

Take out the product from the package and
verify that all the elements listed as its content
are present, do not throw away the packaging
12
3
9
5
7
8
127 V ~ 60 Hz
1 750 W
1,7 kWh
2 200 psi (12,1 MPa)
1 400 psi (7,9 MPa)
14 psi - 21,7 psi (100
KPa -150 KPa)
8 L/min
6 L/min
40°C
7 m
5 m
14 AWG
IPX5
(28.5x 24.5x 63) cm
30 min x 20 min
3 hr
6.5kg (14.3 lb)
before checking that nothing is missing. The
elements used for packaging may be easily re-
cycled.
ASSEMBLY
1. Place the hose and gun holder accessories on
both sides of the piece of equipment.
2. Assemble the lance to the gun.
3. Join the high- pressure hose to the gun using
a 17 mm or adjustable wrench not included with
your washer.
4. Insert the other end of the pressure hose
into the water outlet on the front of the
piece of equipment
INITIAL SETTINGS AND ADJUSTMENTS
• Connect your pressure washer to the water
supply network from home, remember that you
must have a minimum pressure of 15 psi and
flow rate of 6 l/min using a garden hose not
included with the team of not more than 10
meters long.
Install a not included filter in the household
water outlet to remove dirt particles that water
may contain.
Water filter
• Check that the power supply is suitable for the
washer, if you have any doubts consult a special-
ist or call your URREA Service Center.
NOTE: For using extension cords refer to the con-
ductors table at the beginning of this manual.
ATTENTION: Inappropriate use and modifica-
Hose connector