Safety Rules - Action Activejet Selected WTS-135C Manual De Instrucciones

GB
Metal stand fan Activejet Selected WTS-135C
Stylish stand fan Activejet WTS-135C will effectively set large masses of air in motion, providing an instant feeling of cooling on hot days. It has
three operating speeds, an oscillation function, and adjustable angle, so the produced airflow can reach all parts of the room. It is made of steel
covered with a matt coating and has rubber-wood features, which increases its aesthetic value, giving it a unique, industrial look. It is designed
for use in residential, commercial and office spaces.
Features:
• Its large propeller can set large masses of air in motion, providing an instant feeling of cooling.
• 3 operating speeds
• Oscillation function – you can switch on rotary motion or one-direction operation.
• Adjustable head angle – you can choose the direction of the airflow from the top to the bottom.
• The height adjustment allows for smooth lifting and lowering of the fan.
• Robust construction.
• The tripod stand provides exceptional stability and protects against accidental tipping over.
• Modern, stylish design.
• Easy to assembly. You can disassemble the fan after the season.
NOTE:
Before using the fan, read the Instruction Manual. We recommend that you keep this manual for future reference.
While the fan is in operation, it is advisable to follow the basic safety rules to avoid a fire, electric shock and mechanical damage to the body.
Observing the instructions and recommendations contained in the Instruction Manual extends the device's service life.

SAFETY RULES:

1. Do not attempt to repair the device yourself.
2. Keep the device work area in order.
3. Keep the device away from moisture and water, explosive and flammable substances and particles. Failure to follow these rules may result
in a fire or electric shock. Excessive dusting of the device may lead to overheating of the motor and permanent damage to the fan.
4. It is forbidden to use wires with the plug that is not original or any adapters.
5. Take care of the power cord. Do not use the cord to move the device, pull it or pull the plug from the power outlet. Protect the cable from heat,
mechanical damage, oil.
6. Do not put your fingers or devices in the air outlet/inlet grille. Be careful with long hair so that it doesn't get caught in the propeller
of the operating device.
7. The device is not intended for people with limited physical, sensory or mental abilities. Children under the age of 8 and people
with restrictions may use the device only under the supervision of a person responsible for their safety.
8. Do not cover the device e.g. with clothes, do not use it for drying wet clothes, etc.
9. Make sure that the power supply complies with the voltage specified for the device (220-240V ~ / 50-60 Hz).
10. Installation, disassembly, cleaning and maintenance of the fan may take place only after removing the plug from the socket.
11. Do not leave the switched on device unattended.
12. The device is intended for use indoors, in clean and dust free rooms. The fan should be placed on a hard, flat surface at a distance of 0.3–1 m
from all objects, such as radiators, other electrical appliances, furniture, and curtains.
TECHNICAL DATA:
Model: WTS-135C
Voltage and frequency: AC 220–240 V, 50–60 Hz
Power input: 50 W
12
Metal stand fan Activejet Selected WTS-135C
Dimensions (approximate): W 42 cm / D 39 cm / H 104–125 cm (adjustable)
Propeller diameter: 40 cm
Weight: ~6.0 kg
Colour: metallic matt, with rubber wood features.
ASSEMBLY:
1. Start the assembly by assembling the fan base. Insert the three legs (13) into the metal
connector (5) and tighten all three fixing screws (6).
2. Remove the screws and nuts fixing the main unit and the tilt adjustment mechanism
(2), (3), (9), (10).
3. Place the main unit on the middle tube (4), align the holes, insert the carrier screw (10).
4. Install the smaller tilt mechanism screw (2) and the smaller tilt mechanism knob (9).
5. Secure the whole assembly with a large nut (3), screwing it onto the protruding
end of the carrier screw (10).
3
10
4
9 2
CONNECTION TO THE NETWORK:
Ensure that the mains supply at your location matches the voltage shown on the nameplate of the device. If the mains plug of the device has
a protective earth contact, use only electrical outlets that also have a protective earth contact, i.e. a so-called earth pin.
USE:
Make sure that the fan is placed on a flat and level surface away from other heat sources, at a sufficient distance from curtains and other
lightweight materials that the air rush could pull into the fan.
1. Control. The device is controlled by the speed control knob (8).
Position 0 – OFF
Position I – low speed
Position II – medium speed
Position III – high speed
2. Tilt angle. To set the desired angle of the fan head, first loosen the angle adjustment
knobs (3) and (9), set the desired angle and then tighten
the components (3) and (9).
3. Oscillation. To start the oscillation function, press the oscillation button (7).
To stop the oscillation function in the desired position, lift the oscillation button (7).
4. Height adjustment. To set the desired fan height, loosen the height adjustment
knob (12), slide the upper tube out or into the tripod and tighten.
5. Cleaning. Disconnect the fan from the power supply before cleaning. Use a slightly damp cloth (moistened
with water) for cleaning. Never wash the device under running water or immerse it in the water!
6. We recommend unplugging the fan from the power supply during the storm or long periods of non-use.
13
6
9
2
10
3
12
13
GB
5
13
3
10
9