Cleaning And Care - Klarstein HEKTOR 10031695 Funcionamiento Y Manual De Instalación

(5) Timer settings
The time button works when the motor is working only. Press, the cooker hood enter into
timer setting mode. The max delay time is 9 min, and the LED display will display "9".
When the timer is set, the LED display will display "9", "8" ,"7"... decreasing by every
minute, when it display "1", the motor will start counting down from 1 mins, and will
stop working.
• Press TIMER once, the cooker hood will enter into timer setting mode, press TIMER
once again, the cooker hood will exit the timer setting mode.
• Press TIMER once when the cooker hood is working at timer setting, the cooker
hood will exit the timer setting mode automatically.

CLEANING AND CARE

Note: Before maintenance or cleaning is carried out, the cooker hood should be
disconnected from the main power supply. Ensure that the cooker hood is switched off
at the wall socket and the plug removed.
General
Cleaning and maintenance should be carried out with the appliance cold especially
when cleaning.Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on
the surfaces.
Stainless steel
The stainless steel must be cleaned regularly (e.g.weekly) to ensure long life expectancy.
Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may be used.
Note: Ensure that wiping is done along with the grain of the stainless steel to prevent
any unsightly crisscross scratching patterns from appearing.
Control panel surface
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is
clean and well wrung before cleaning. Use a dry soft cloth to remove any excess
moisture left after cleaning.
Note: Using neutral detergents and avoid using harsh cleaning chemicals, strong
household detergents or products containing abrasives,as this will affect the
appliance appearance and potentially remove any printing of artwork on the control
panel and will void manufactures warrantee.
EN
21