Technical Specifications - Work Pro DCA 1 Instrucciones De Usuario

EN

TECHNICAL SPECIFICATIONS

LINE input sensitivity:
MIC input sensitivity:
Frequency Response:
Rear panel connectors:
Front panel controls:
Power consumption:
Dimensions (HxWxD):
Input sources:
8 mono inputs (1 MIC in stacking)
Outputs: 2 poweres outputs + 1 monitor output
775 mV / 0 dBu.
7.7 mV / -40 dBu.
Input impedance: 20 kΩ.
20 Hz - 20 kHz.
S/N Ratio:
> 96 dB.
THD+N: <0.01%.
Overheat, Short circuit, DC protection.
Protections:
CLIP.
Power output: 2 x 120 W RMS (4 Ω).
Phantom power: 24 V dc
Conectivity:
RS232/RS485-DMX.
Display: Blue colour backlight 2x16 alphanumeric LCD.
8 x RCA (LINE inputs), 1x XLR3(MIC
input), 3x Euroblock_3 pin(conectivity), 2 x
euroblock_2 pin (power output), 1x RCA double
(monitor output), 1x IEC (mains supply).
1x Encoder (Variation,Navegation), 4 x push
switch (direct input selection).
LCD display, 4 x green LED (direct selection),
Indicators:
6 x LED (amplifier state).
Mains supply: AC 120 - 240 V, 60/50 Hz.
250 W.
483 x 44 x 262 mm.
Weight:
2,5 kg.
9
DCA 1
User Manual/Manual de Uso DCA 1