Control Interface - Work Pro DCA 1 Instrucciones De Usuario

Therefore, if it will be the fainal setup of the device, the first windows will be like this:
0_1:000 12
0_2:000
4. REMOVING INPUTS
DCA 1 allows to remove or re-assign the added input sources on each output:
Push the encoder, the symbol
Turn the encoder clockwise to increase the or counter-clockwise to reduce the input number (from 1 to 8). when reach the
correct value, push the encoder, the symbol
value, turn the encoder to pass to next menu.
4.- REMOVE IN
0_1:1
On this example, the input source 1 has been removed to Output 1.
Therefore, if it will be the final setup of the device, the first windows will be like this:
0_1:000
0_2:000
Input source 2 assigned to OUTPUT 1 and Input source 5 assigned to OUTPUT 2.
Turn the encoder clockwise to pass to next sub-menu

5. CONTROL INTERFACE

5.-INTERFACE
PUSH TO ENTER
DCA 1 has different control modes selectable through this menu function.
Push to select:
5.1 INTERF. MODE
MANUAL
With MANUAL, we can operate with DCA 1 manually, selecting the input source and controlling the volume
5
: 0_1:
beside will blink indicating the possibility to remove input sources in OUTPUT 1.
: 0_2:
beside
0_2:
2
5
6
will blink to change this value. After to confirm this second
User Manual/Manual de Uso
EN
DCA 1