mabe RMF0411PYMNO Instructivo página 19

18
• Adjust the two leveling legs to their highest position.
• To remove the door, it is necessary to tilt the unit back-
wards. The unit should rest on a solid surface so that it
does not slip during the procedure.
• All parts removed should be saved for installation on the
opposite side.
• Do not lay the unit down as it may damage the refrig-
eration system.
• We recommend that 2 persons handle the unit during
assembly.
1. Remove the plastic cap from the top hinge of the door.
2. Loosen the three lower bracket screws. Remove the leg from the
opposite side.
3. Set them aside.
4. Slide the door down about 15 cm. Release it from the top hinge
pin and remove it from the unit.