FONESTAR PDA-1408 Manual De Instrucciones página 6

EN
CONFIGURATION AND CONTROL SOFTWARE
The PDA-1408 loudspeaker processor is configured using PC software. To download the software, go to
fonestar.com and search for the product PDA-1408. Once there, open the "Software" tab to download the
file to your computer and install the software. This software is compatible with Windows 7 or higher. The
software has two connection modes for speaker processor configuration.
1.- Daisy chain network mode: Used to configure the PDA-1408 loudspeaker processor. In this editing
mode, the PC and PDA-1408 loudspeaker processor must be connected directly by an RJ-45 cable.
It is necessary to set the IP address of the processor. To do this, click the SETUP button and then click
SCAN to start the automatic search for the IP and MAC address of the PDA-1408 loudspeaker processor.
- 6 -