Input Dsp Channel - FONESTAR PDA-1408 Manual De Instrucciones

EN
EDIT MODE
PDA-1408
The edit mode of the PDA-1408 loudspeaker processor allows real-time editing of input/output signal
processing parameters, source zoning, input attenuation per signal level, feedback cancellation, auto-mixing,
saving and loading presets, activating/deactivating relays, renaming the device, and restoring factory settings.
The Input DSP Channel tab is displayed by default.

INPUT DSP CHANNEL

1.- EXP/GATE MODULE:
Adds dynamic range to the signal for each input channel. When the input signal is below the threshold, the
expander amplifies it with the adjusted ratio value. If the signal is above the threshold, the output remains
identical. By setting the ratio value at maximum (Limit), the expander acts as a noise gate.
a.- Visual display of the EXP/GATE module.
b.- Release: expander release time when the signal passes over the threshold value.
c.- Ratio: amplification ratio between the input signal and the amplified signal.
d.- Threshold: threshold value, the signal below this value will be amplified according
to the selected amplification ratio.
e.- Attack: expander reaction time when the input signal is below the threshold value.
f.- Bypass: the input signal is not processed and is diverted to the next processing
module.
g.- Default: restores the default values of the EXP/GATE module.
2.- POLARITY MODULE
Polarity: allows the input signal phase to be inverted by 180º.
- 8 -