Troubleshooting; Technical Information; Technical Data - Medquip MQ2200 Manual De Instrucciones

6.

TROUBLESHOOTING

PROBLEM
Indicator not illuminated,
No air, No mist
Indicator illuminated,
With air, No mist
Mist with odor
Small mist output
7.

TECHNICAL DATA

Speci cation
Voltage
Power
Moisture
Water tank
Suitable Room Size
POSSIBLE CAUSE
• The power plug is not
properly plugged.
• The power switch is not
turned on.
• The water level in the water
tank is too high or too low.
• There is no water in the water
tank.
• The automatic constant
humidity knob is not turned on.
• The water level float cap is not
held down.
• New unit.
• The water in the tank is not
clean.
• There is scale formation on
the transducer.
• The water is dirty or has been
stored too long.
MQ2200
110V/ 60Hz
25W
~300 ml/H
1 Gal (3.7 L)
325 Sq ft
7
WHAT TO DO
• Plug the power properly.
• Turn on the power switch.
• Adjust the water.
• Check for corrrect fit between
water tank and base.
• Fill the water tank.
• Turn on the automatic constant
humidity knob clockwise.
• Hold down the water level float
cap.
• Open the water tank.
• Let unit stand outside
for 12 hours.
• Clean or replace the water tank.
• Clean the transducer.
• Replace with clean water.
MQ2300
110V/ 60Hz
25W
~300 ml/H
0.85 Gal (3.2 L)
325 Sq ft
to air out
MQ2400
110V/ 60Hz
25W
~300 ml/H
0.85 Gal (3.2 L)
325 Sq ft