Lenco Xemio-861 Manual De Usuario página 25

files.
Delete
For delete the REC file, using </> and
▪
delete REC file, press to select "Yes" to delete or "No" for abort
or
Choose "Delete All" in "FM REC libray", press
▪
using </> and button to choose "Yes" to delete or "No" for abort
S. Reset Device
In some circumstances, the device may encounter dead halt during use. This
device has design with built-in a mini tact switch which located at the behind
of the earphone jack, so it can provide reset function to restart the device by
pass through the earphone jack hole.
To Reset:
▪ Press & hold 8 seconds
Important: Do not reset the device if it is proper working.
T. Trouble Shooting
Unit cannot turn ON ● Check battery is it charged with enough energy.
No sound is heard
from headphone.
Characters in LCD are
corrupted
Download of media
files fails.
Bluetooth can't pair
and connect to a
Bluetooth receiver
device
No radio station
U. Frequently Asked Question
Where can I find
updates and
● Check whether Volume is set "0" and connect the
headphone plugs firmly.
● Check whether the headphone plug is dirty.
● Corrupted MP3 may make a static noise and the
sound may cut off. Make sure that the music files
are not corrupted.
● Check whether the right language has been
selected.
● Check whether USB cable is damaged and is
connected properly.
● Check whether driver is installed correctly.
● Check whether Micro SD memory Card is in full.
● Make sure Bluetooth receiver supports A2DP.
● Make sure Bluetooth receiver is placed within
connection distance in 5 – 10 meters.
● Make sure Bluetooth receiver has already entered
into pairing mode.
● Check whether the FM station's is tuned in correct
frequency and programed.
● Check for latest Software update at
http://www.lenco.com/support/firmware/
button to choose the desired
25
to go to delete menu,