Pre-Installation; Application; Tools Required; Materials Required (Not Included) - Everbilt UT03301 Guía De Uso Y Cuidado

Pre-installation

APPLICATION

This submersible utility pump is designed for water removal applications. Pump water only with this pump.It can automatically drain or

remove water from the following: pits, sinks, window wells, basements, swimming pool covers, boats, low spot in yards, or other
flooded areas.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not designed to

function as a permanently installed sump pump. It is also not engineered to be run continuously as a "fountain" or "waterfall" pump.
Do not use where water recirculates.

Not designed for use as a swimming pool drainer.

Features:
Operating water depth: minimum 1-1/4 in.


TOOLS REQUIRED

Flathead
Screwdriver

MATERIALS REQUIRED (NOT INCLUDED)

NOTE:The hose and hose kit are not shown to scale.
Phillips
Wrench
Screwdriver
Garden Hose or
Hacksaw
or Tubing
Cutter
4
Sump Pump Discharge Hose Kit
Safety
Goggles