Ariens Gravely Instrucciones Para Su Montaje página 2

ASSEMBLY
WARNING: AVOID INJURY. Read and
understand the entire Safety section in the
Owner's Manual before proceeding.
DO NOT start engine until instructed and all
assembly steps have been completed.
1.
Remove crate top and sides. Remove shipping bag and
cut straps retaining unit to crate bottom. DO NOT cut
cable ties retaining cylinder to beam.
Do NOT cut.
Cut straps.
2.
Support draw bar (# 1). Remove and dispose of four 1/4 x
1/2" Taptite bolts retaining draw bar to frame.
1
3.
a. Fold front stand (# 6) down and lock in place with
lock pin (# 7).
b. Position draw bar in frame and attach using four
1/2 x 1" hex bolts (# 2) and four 1/2" hex nuts (#
3). Insert bolts from inside of frame with hex nuts
on the outside. Make sure that front stand is
facing down before attaching.
EN - 2
Remove and
dispose.
2, 3