Instrucciones De Ensamblaje - MD SPORTS 1654831 Instrucciones De Armado

Ocultar thumbs Ver también para 1654831:
Tabla de contenido

Publicidad

English
ASSEMBLY INSTRUCTIONS:
Find a clean, level place to begin the assembly of
1.
your Combo Table. The table will be assembled
upside down and then turned over on its legs once
the assembly is completed. This game table is
heavy, and turning it over will require at least two
strong adults.
2.
. Remove all the parts from the box and verify that
you have all of the listed parts as shown on the
parts list pages. Carefully cut or tear the four
corners of the box so that the bottom of the box can
be used as your work surface.
1
X 1
X 2
2
X 1
51
X 4
A8
X 2
A9
X 4
P2
FIG.1
3. Apply the Glue (#51) to the bottom of the Support
Braces (#2) as shown in FIG. 1A.
4. Please reverse the Support Braces (#2) and attach to
the playfield of the Hockey Mainframe (#1) using one
Screw (#A9) per Support Brace, and attach the
Support Braces (#2) to the Side Aprons of the Hockey
Mainframe (#1) using two Screws (#A8) per Support
Brace.
1654831
(Continued on the next page.)
FIG. 1
Reverse
A9
/ Reverso

INSTRUCCIONES DE ENSAMBLAJE:

1.
Encuentre un lugar limpio, plano para comenzar el
montaje de su Mesa Combo. La mesa será montada
al revés y luego la voltee sobre sus piernas una vez
montada está completado. Esta mesa de juego es
pesada y requerirá por lo menos dos adultos fuertes
para el volteo.
2.
Quite todas las partes de la caja y verifique que
usted tiene todas las partes catalogadas como
mostrado a la lista de partes debajo. Con cuidado
de cortar o rasgar las cuatro rincones de la caja de
modo que el fondo de la caja pueda ser usado como
su superficie de trabajo.
51
2
2
1
FIG.1
3. Aplique el Pegamento (#51) al fondo de la Abrazadera
de Soporte (#2) como mostrado en la FIG. 1A.
4. Favor revertir la abrazadera de soporte (#2) y adjuntarla
a la cancha de juego de la unidad principal de hockey
(#1) usando 1 tornillo (#A9) por abrazadera de soporte,
y adjuntar las abrazadera de soporte (#2) al delantal
Lateral de la unidad principal de hockey (#1) usando 2
tornillos (#A8) por abrazadera de soporte.
6
FIG. 1A
2
A8
(Continúe en la siguiente página.)
Español
P2
www.themdsports.com

Publicidad

Tabla de contenido
loading

Tabla de contenido