Aux In Function - XD P326.911 Manual De Instrucciones

K. AUX IN Function
1. In power ON mode, connect the Bluetooth Speaker's "AUX IN Jack (8)" with an external device's
"Earphone / AUX / LINE" Output through the audio cable (Supplied).
2. The Bluetooth Speaker will switch to "AUX In" mode automatically from Bluetooth mode, and the "Mode
LED (12)" will switch to long red light from blinking blue.
3. Now the "AUX In" Function is ready, start to music play from your external device by it control and or
program, for example, Play, Stop, volume control...etc.
4. You also can use Bluetooth Speaker control;
5. Long press the " (4)" button to increases the volume level.
6. Long press the " (2)" button to decreases the volume level.
7. When maximum or minimum volume is reached, a beep will sound.
8. Disconnect the Audio cable when it is done.
Remark:
1. The maximum or minimum volume reminds beep sound will not enable when the Bluetooth speaker is
in working at Stereo Pairing function.
2. In Bluetooth stereo pairing mode, if you insert AUX in cable into the host unit, both units will be
disconnected from Bluetooth stereo pairing mode. Means only host device working as AUX in function, the
slave unit is turn to waiting mode for 8 minutes and turn off automatically. Or,
3. If you insert AUX in cable into the slave device, only slave device working as AUX in function. Besides,
the host unit is keep working at Bluetooth music play function at the same time.
4. When you disconnect the Aux in function, two devices should be reconnected automatically if both of
them are still operation mode. If not, switch two device's power to off and then turn again for reconnect
the Bluetooth stereo pairing as you want it.
L. Low Power Reminder And Auto Sleep
1. The Bluetooth Speaker will send tones sound from speaker by every 25 ~ 30s. When you heard this
reminder, please connect the device to the USB power for charging, if you still want to use the device.
2. If not, the Bluetooth Speaker will power Off automatically when the battery is keeping low energy level
in some minutes.
3. In this case, the device cannot be turned On, until you recharging the battery at least 10 ~ 15 minutes,
because the rechargeable battery has not enough energy.
4. Long press " (1)" button to turn On the device after charged with enough energy if you want.
M. Connecting two speakers and a BLUETOOTH device for the Stereo pairing function
Activate the stereo pairing function:
1. Bring two speakers within 1 m of each other, and then turn on each unit.
2. Long press the "Pairing (10)" button, for at least for 3 seconds, to go into Stereo Pairing mode on one
unit. A series of tones sound are heard and the "Mode LED (12)" will fast blinking blue. It is waiting for
stereo pair connection. (This unit will default as host and left channel device)
3. And, short press the "Pairing (10)" button on the other unit and it also go into Stereo Pairing mode.
(This unit will default as slave and right channel device)
7
Manual_P326.911_Wireless_Double_Speaker.indd 7 6-10-2016 10:25:38