Safety Precautions - Dranetz XBC-HDPQ Instrucciones De Uso

Safety Precautions

The following safety precautions must be followed whenever any type of
voltage or current connection is being made to the instrument.
• When connecting to electric circuits or pulse initiating equipment, open
their related breakers. DO NOT install any connection of the instrument
on live power lines.
• Connections must be made to the instrument first, then connect to the
circuit to be monitored.
• Wear proper personal protective equipment, including safety glasses
and insulated gloves when making connections to power circuits.
• Hands, shoes and floor must be dry when making any connection to a
power line.
• Make sure the unit is turned OFF before connecting probes to the rear
panel.
• Before each use, inspect all cables for breaks or cracks in the
insulation. Replace immediately if defective.
• If the equipment is used in a manner not specified in this user's guide,
the protection provided by the equipment may be impaired.
These safety precautions are repeated where appropriate throughout this
manual.
5