Secondary Audio Modes; Secondary Audio Mode Selector - Bose A20 Guia Del Usuario

Secondary audio modes

If you have connected one or more secondary audio sources to the headset, you
must decide how you want to hear those secondary sources.
To select how you will hear your secondary audio sources, use the Secondary
Audio Mode selector on the control module.

Secondary Audio Mode selector

The selector has three positions: MUTE, MIX and OFF.
Position
MUTE
MIX
OFF
Only one secondary source can be heard at a time. Audio from a secondary
Note:
source will never override intercom communications.
Incoming and outgoing phone calls automatically mute all other secondary
Note:
audio sources (when the Secondary Audio Mode selector is in either the
MUTE or MIX position). During a Bluetooth phone call, the intercom and the
phone call will be heard as mixed.
Function
Intercom prioritized
over any secondary
audio sources
Intercom mixed with
any secondary audio
sources
Intercom only
Note: In OFF mode,
Bluetooth
®
power is
disconnected,
and all
antennae are
disabled.
Description
If an intercom signal is detected, all
secondary audio sources are temporarily
muted. Secondary audio will return after
intercom audio ceases.
Also see "Managing multiple secondary
sources" on page 26.
All secondary audio sources are mixed
with the intercom audio. (Audio from a
connected device will keep playing during
intercom communications).
Note: In MIX mode, you will hear a
maximum of two audio sources – the
intercom plus one secondary source.
Also see "Managing multiple secondary
sources" on page 26.
Only intercom audio is active. All secondary
audio sources are off.
Note: If you switch to OFF mode while
connected to a Bluetooth source,
you many need to re-establish your
Bluetooth connection the next time
you turn on the headset.
Using the Headset
English - 25