Tools Required - Whittier Wood Furniture 975Wc Instrucciones De Ensamble

ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue
Ac
Fig. 1a
Fig. 1c
1. Glue 22 Wood Dowels (Ac) into parts as illustrated. Gently tap with a rubber mallet and quickly
wipe up any excess glue with a damp rag. See Figures 1a-1d.
Fig. 2a
2. Attach Sleepers (Jc, Rc & Sc) to Left Side (Fc) making sure pocket drilled screw holes in each
sleeper faces down. See Figure 2. The rounded edge of the Lower Front Sleeper (Sc) needs to
face out (see figure 2b) and the back edge of the Lower Back Sleeper (Rc) should be flush with
the groove in the back of the Left Side (Fc). Use four 4x30mm Phillips Screws (B) through
pocket drilled holes. See Figure 2.
975Wc Scrapbooking Cart

TOOLS REQUIRED:

Ac
Ac
Rc
Jc
Ac
Ac
Ac
B
Fig. 2
Fc
Ac
Ac
Ac
Ac
Ac
Fig. 1d
Sc
Sc
B
Fc
Gc
Ac
Ac
Jc
Jc
B
B
Rc
B
975WC – Page 3 – Rev. 8/08
Fig. 1b
Gc
Fig. 2b