Waste Electrical And Electronic Equipment - Gallagher FAULT FINDER Instrucciones De Uso

REPLACING THE FAULT FINDER
BATTERY
1. Remove the screws.
Note: Make sure the black seal sits neatly in place to
ensure the Fault Finder is waterproof.
SPECIFICATIONS
• Voltage: 0.2 to 15 kV
• Current: 1 - 99 Amps
• Ba ery: CR2032
WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT
separate collec on and recycling of your waste equipment at
the me of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human
health and the environment. For more informa on about
where you can drop off your waste equipment for recycling,
please contact your local city recycling offi ce or the dealer
from whom you purchased the product.
6
This symbol on the product or its packaging
indicates that this product must not be
disposed of with other waste. Instead, it is your
responsibility to dispose of your waste
equipment by handing it over to a designated
collec on point for the recycling of waste
electrical and electronic equipment. The
2. Replace the ba ery.