E
17. Stand the assembled unit upright.
18. Pick up the Door Panel (M) and fasten the Hinge Bases to the hinge supports with four 5/8" Zinc
Screws (10) in each.
19. Open and close the door to make sure it is aligned and shut correctly. If necessary, adjust the screws for
a good fit. Refer to the hinge sticker on the door for adjustment.
Assembly Instructions
F
DO NOT fully tighten the screws.
#3 x 5/8" Zinc Screw
(8 used in this step)
M
16
10
⑩