5. Insert two Wood Dowels (3) into the large holes on the front edge of Top Panel (A). Tap in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
6. Align the drilled holes on the Top Front Stretcher (H) with the inserted Wood Dowels (3) on Top Panel
(A), and then press them together. Secure the Top Front Stretcher (H) in place with three 38 mm Screws
(4) using a Phillips screwdriver.
Assembly Instructions
A
Wood Dowel
(2 used in this step)
③
4
3
3
M4 x 38 mm Screw
(3 used in this step)
8
H
④