Fora GTel Manual Del Propietário página 16

When removing the lancet, follow the instructions from the lancing
device insert.
WARNING:
 The used lancet and test strips may be biohazardous. Please discard them
properly.
 Wash and dry your hands thoroughly after handling the meter, lancing device
and test strips to prevent infection. For more information, please refer to the
MAINTENANCE section.
10
6. Select the appropriate measuring
mode
For glucose tests, there are three
modes for measuring: No Tag (General),
Before Meal (AC) and After Meal (PC).
For β-ketone tests, there is one mode
for measuring, General Test. There is no
need to set a measuring mode after the
test result is shown.
If your test result is higher than the
normal range, the background will be
red. If it is lower than the normal range,
the background will be yellow. The
background will be green when readings
are within the set threshold.
7. Eject the used test strip
Eject the test strip by sliding the eject
button forward.
8. Transmitting data
The meter automatically transmits new
data after each measurement.