Setting The Operating Temperature - Ansonic FCA 687 NF Manual De Instrucciones

en
Setting the operating
temperature
Freezer Compartment Temperature can be
adjusted by the electronic display (Fig 2).
The temperature of the fridge compartment
depends on the amount of the air coming from
the freezer compartment.
You can adjust the temperature of the fresh
food compartment by setting the thermostat
knob between 1 and 5 positions. (Fig 3).
1 = Lowest cooling setting (Warmest setting)
5 = Highest cooling setting (Coldest setting)
Control Panel:
Control Functions
Considering Figure.2, the following functions
are implemented on the appliance.
a. Focus-Cool
b. Freezer Set
c. Eco-Fuzzy
d. Quick Freeze
e. Actual Fridge Temperature
f. Actual Freezer Temperature
g. Freezer Bar Graphs
h. Focus-Cool Icon
i. Economy Icon
j. Eco Fuzzy Icon
k. Quick Freeze Icon
l. Alarm Icon
All manuals and user guides at all-guides.com
Description of the Control Functions
a. Focus-Cool
This button is designed for fuzzy cooling of
the fridge. Press focus cool button to set the
function and the focus cool icon will light on.
The focus cool function will automatically take
place when there is an instantaneous change
on temperature of the fridge compartment.
The instantaneous change on the temperature
may occur during daily usage of the appliance
due to loading fresh vegetables into fridge
compartment or keeping the fridge door open
for a long time in summer. The focus cool
function aims to preserve the foods against
instantaneous temperature changes in the
fridge compartment.
To deactivate focus cool function, it is enough
to press focus cool button once more. Even
after the power failure, the appliance will recall
focus cool function if it is not deactivated which
is sometimes advantage.
b. Freezer Set
The desired freezer temperature of the
appliance can be adjusted by using freezer
set button. To change the freezer set
temperature press the freezer set button. The
first time the button is pressed the current set
temperature is shown on the display then
afterwards, each time the button is pressed
the new freezer set temperature will be
displayed in sequence: -18, -20, -22, -24, -18,
...
The new freezer set temperature will blink on
the display for 5 seconds only. Then the actual
freezer temperature will be shown.
c. Eco-Fuzzy
This button is designed to operate the
appliance in the most economical mode via
fuzzy algorithm. Press eco fuzzy button to set
4
en