What, If - Ansonic FCA 687 NF Manual De Instrucciones

en

What, if...

1- The appliance will not work, even though
it is switched on.
• Check if the power cable is properly
connected!
• Check if the mains supply is in order, or if a
fcircuit breaker has been tripped!
• Check the temperature control for correct
setting!
2- There is a power failure.
Your freezer is suitable for the long-term
storage of frozen food that are available
commercially and also can be used to freeze
and store fresh food.
Do not open the door in case of a power failure.
For a rated appliance, frozen food in
the freezer compartment will not be affected
if the power failure lasts shorter than the
"Conservation Time From Failure (hours)"
mentioned in the rating label.
If the power failure is longer than the
"Conservation Time From Failure (hours)",
then the food should be checked and either
consumed immediately or cooked and then
re-frozen.
3- The interior light does not work.
Check the power supply!
Check the installation of the light bulb! Unplug
the power cable before checking the light bulb.
(Also see the section "Replacing the interior
light")
4- There is high temperature alarm
If the actual temperature of the freezer
compartment is warm, then the alarm icon on
the display (Fig. 2-l) lights on. The alarm icon
lights off when the actual temperature of the
freezer compartment cools down.
The high temperature alarm may be triggered
in the following situations.
a) Warm food storage
b) Warm air in the freezer compartment
c) Freezer door is left open for a long time
All manuals and user guides at all-guides.com
If the high temperature alarm remains on for
more than 24 hours then contact with the
customer service.
The high temperature alarm is not active in
24 hours after plugging the appliance into the
electricity.
5- There is error messages and alarm
In case any failure condition due to wiring
connection of the appliance occurs, then the
alarm icon on the display (Fig. 2-l) starts
blinking together with the relevant error
message.
In case some certain characters (E0, E3, ..etc.)
appear on the display then contact with the
customer service. The fuzzy control algorithm
takes place in order to preserve food till the
customer service arrives.
The alarm icon lights off just after the failure
is remedied.
6- There is actual fridge temperature failure
The appliance performs cooling according to
the fridge thermostat position and the average
temperature of the packages inside the fridge
compartment is shown on the display.
There may be some oscillations on the actual
fridge temperature shown on the display in
the following conditions:
a) The fridge door is Opened / Closed
frequently
b) Loading warm packages inside the fridge.
c) Leaving the fridge door open for a long
period of time.
11
en