Instruction Manual (Gb) - hymatik Compac CRK4 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Instruction Manual
Compac Repair Kit, models CRK4 and CRK10.
Important: Read and understand this manual before use!
Before using this repair kit (collision kit) read the manual completely and thoroughly. Understand
the operating procedures, safety warnings and maintenance requirements. Failure to do so could
cause accidents resulting in serious or fatal personal injury and/or property damage.
The use of repair kits is subject to certain hazards that cannot be prevented by mechanical means,
but only by the exercise of intelligence, care, and common sense. Due to the fact the use and
versatility of repair kits is limited only by the imagination and ingenuity of its operator. Compac
cannot be responsible for product damage or personal injury due to faulty operator judgement or
improper use or setup of the equipment. It is therefore essential to have owners and personnel
involved in the use and operation of equipment who are careful, competent, trained, and qualified
in the safe operation of the equipment and its proper use. Examples of hazards are dropping,
tipping, or slipping of motor vehicles or their components caused primarily by improperly securing
loads, overloading, off-centered loads, improper setups, etc.
It is the responsibility of the owner to make sure all personnel read this manual prior to using this
kit. It is also the responsibility of the kit owner to keep this manual intact and in a convenient
location for all to see, read and understand. If the manual is lost or not legible, contact Compac
Hydraulik, for a free replacement or download the appropriate manual from www.compac.dk .
If the operator is not fluent in English, the product and safety instructions shall be read to and
discussed with the operator in the operator's native language by the purchaser/owner or his
designee, making sure that the operator comprehends its contents.
Warning! Safety:
The kit owner is responsible for the kit being installed and used in accordance with relevant
local safety standards.
Wear protective eye wear when performing work.
Do not use the kit beyond its rated capacities. Capacity ratings differ according to extension
tubes and adapters being used. Use of extension tubes and adapters reduce the capacity. See
illustration on the last page of this manual! The spreaders (13) is rated at ½ ton capacity.
When using multiple extension tubes always position the shortest length tube farthest away
from the cylinder.
Make sure all attachments and extension tubes are aligned and fully engaged before operating
the pump.
Make sure there is plenty of clearance around the hose connection to allow safe and
unobstructed travel of the coupling system.
Do not continue to pump when the piston reaches the maximum extension. Excessive pumping
could cause damage to the piston and cylinder and/or personal injury.
Always keep the hydraulic hose in as straight a line or arc as possible. If the hose is bent
sharply, stop and rearrange the setup until the hose can be positioned correctly.
Be careful not to pinch the hydraulic hose and avoid dropping heavy objects onto the hose. If
the hose leaks fluid while under pressure, the piston will retract. If the hose is cut, loss of
pressure will be immediate.
Never use the hydraulic hose as a handle to carry the pump and cylinder assembly.
Make sure the setup is stable and secure before performing any work. Always operate the
pump slowly and carefully, keeping an eye on the operation to be sure the setup is doing its
intended job correctly and that the load is safely centered or locked in position.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Compac crk10

Tabla de contenido