Baltic 165N Guía De Usuario página 13

ENGLISH
6
REARMING BALTIC AUTOMATIC VERSION
Unscrew the used cartridge anticlockwise
1.
by the inflation mechanism. Replace the cartridge if it has been activated or if it has passed its
expiry date
it must be replaced before November 2023.
Refit the examined cartridge if ok if not screw in a new cartridge clockwise and tighten it by hand
2.
until no threads are visible.
Remove the cylinder retaining strap
3.
the cylinder in an environmentally friendly manner. Check that the lever and the pin (visible at the
bottom of the valve head next to the CO
on the activating cord. Place the lever in closed position and fit a new manual firing indicator clip
to lock it into position.
Visually check that the O-ring in the bottom of the valve head, next to the CO
4.
is undamaged
Screw in a new, clean and unpierced CO
5.
7
REARMING BALTIC MANUAL VERSION
Remove the cylinder retaining strap
1.
the cylinder in an environmentally friendly manner. Check that the lever and the piercing pin
(visible at the bottom of the thread for the CO
activating cord. Fold back the lever and secure it by pressing it against the valve head until it
clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2.
13
is undamaged
Screw in a new, clean and unpierced CO
3.
Use no tools. Refit the cylinder retaining strap over the cylinder
When the CO
, which is stamped on the side of the cartridge. For example, 11 2023 means
8
14
.
13
16
15 .
cylinder is mounted correctly, the indicator window should be green.
2
. Follow the illustrated instructions on the label
12
and unscrew the CO cylinder anticlockwise. Discard
6
2
cylinder's fastening) 13
2
cylinder using only hand force until absolutely tight.
2
and unscrew the CO cylinder anticlockwise. Discard
6
2
cylinder 15 can move freely, by pulling on the
2
cylinder using only hand force until absolutely tight.
2
can move freely, by pulling
cylinder's fastening,
2
cylinder's fastening,
2
.
6
17