Husqvarna TC 242T Manual De Operario página 26

Ocultar thumbs Ver también para TC 242T:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SERVICE AND ADJUSTMENTS
TO REMOVE CABLES, REVERSE ORDER -
BLACK cable first from chassis and then from the fully
charged battery.
RED cable last from both batteries.
WEAK OR
DEAD BATTERY
BATTERY MAINTENANCE (See Figs. 43 - 45)
WARNING: Not following instructions can
result in sparks, arcing, or open flames which
could lead to serious personal injury, or
property damage. Before handling battery (1),
re move metal brace lets, wrist watch bands,
rings, etc. from your person. Touch ing these
items to battery could result in burns.
WARNING: Ensure tractor ignition switch
is in the OFF position and ignition key is
REMOVED.
1. Battery
2. Ground screw (Silver)
3. Protective sleeve
4. Terminal end
5. RED Battery Cable (+)
6. Solenoid stud
7. Battery door latch
(Shown in closed position)
8. Battery door
5
3
4
2
FULLY CHARGED
BATTERY
Fig. 42
9. Battery door holders
10. Square nut
11. Bolt
12. BLACK Battery
Cable (-)
13. Battery terminal
14. Red terminal boot
15. Bagger Support
Bracket
12
Fig. 43
7
15
11
13
10
REMOVAL
Locate silver ground screw (2) on right side plate of
tractor, above right rear tire.
Using a ½ inch (13mm) wrench or socket, completely
remove the silver ground screw (2) and set aside.
Pull protective sleeve (3) over exposed terminal end
(4) COMPLETELY covering terminal end.
Using a 7/16 inch (11mm) wrench or socket, remove
larger RED (+) battery cable (5) from solenoid stud (6).
DO NOT REMOVE smaller red wire from wiring har-
ness on solenoid stud.
6
From the rear of the tractor, open battery door (8) and
let it rest on the right hand bagger support bracket (15).
WARNING: Before pulling battery out of the
battery compartment, ensure the red terminal
boot (14) is covering the positive terminal (+).
Pull battery (1) with both cables attached out of battery
compartment and rest on battery door (8).
MAINTENANCE
Slide red teminal boot (14) up positive cable (+) to
expose the positive terminal (+).
Remove square nuts (10), bolts (11) and battery cables.
Clean / remove / replace battery (1) as needed.
26
12
8
Fig. 44
11
12
Fig. 45
9
5
14
1
14
5
13
10

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido