Selecting A Location - STACK-ON QAS-1512-B Manual De Instrucciones

SELECTING A LOCATION

e safe must be mounted to a shelf . For optimal
safety and security, the safe should be installed in
an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE: is safe must be mounted to a shelf.
Failure to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE:
needs to be in an upright position, as shown in
gure 1, for the locking mechanism to function
properly. Failure to mount the safe in the
corrrect upright position will compromise the
safety and security of the safe.
Figure 1
e safe
QAS-1512-B
QAS-1545-B
Secure the safe to a shelf using the predrilled
mounting holes in the safe and hardware provided.
Place the safe in the desired location and mark the
mounting holes to be used with a pencil. Move the
safe and drill the pilot holes for the screws. For
mounting to a shelf, drill 3/16" diameter pilot
holes and a ach the safe using the 3/4" screws and
washers. (Figure 2)
Figure 2
MAINTENANCE
Do not use glass cleaners or sprays on this safe.
Clean with a damp cloth.
IMPORTANT
Keep your keys in a secure place, away from
children. Keep this record of your serial number in a
secure place separate from your safe. To order a
replacement key set, follow the instructions on the
a ached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
QAS-1512-B
QAS-1545-B
4
18
40546-1507