Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Spacer
Spacer
４N・ｍ
32mm
Bolts
［M6×32］
Enlarged
View
Body
Cushion base
Spacer
Cushion base
Cover
Cushion base
Cover
Hex Wrench
Bolts
［M6×32］
Base
bracket
Base bracket
Placing the cushion bases
Insert the spacer into the cushion base
installation hole. At the FRONT
installation location, align the hole with
the rear nut of the vehicle.
At the REAR installation locations
align the hole with the front nut of the
vehicle and place it over the cover on
the installation location.
Attaching the base brackets
Place the base bracket on the
cushion base. Secure them with the
long bolt [M6x32] (included) using the
Hex wrench (included) until the bolts
are firmly tightened while holding both
together parallel to the roof molding.
●All base brackets (4 pcs.) are identical. The bracket is
symmetrical with respect to the side-to-side axis; its
installation orientation does not matter.
EN-6
Installing System Carrier
EN-3
-EN
4182808TR1453
-A
Publicidad
Tabla de contenido
