Brief description
Brief description
Safety information
18
With the 2 x 1:8 active antenna splitter, up to
eight receivers (EM 3031) or twin receivers (EM
3032, EM 3532) can be operated with only one
pair of diversity antennas.
Each diversity section is fitted with a wideband
input module which can be exchanged for a
selective input module. Due to the built-in
antenna boosters, the signals are routed
without loss the the connected receivers.
The active antenna splitter allows you to make
receiver systems with up to 16 channels.
Areas of application:
! Multi-channel RF installations (fixed or
mobile)
! Permanent installations in small conference
centres and similar venues
The 2 x 1:8 active antenna splitter must only be
set up and connected by an electrical
engineering expert.
Never open electronic units! This must only be
done by authorized personnel and is all the
more important for units connected to AC
outlets. If units are opened by customers in
breach of this instruction, the warranty
becomes null and void!
Make sure that the air vents of the unit are not
covered or blocked. Keep the unit away from
central heating radiators and electric heaters!
Set up the unit on an even surface or mount it
into a rack! Lay the cables in such a way that
no-one can stumble over them!
Keep liquids and small parts which conduct
electricity away from the unit! Use a damp cloth