Sennheiser ASA 3000 Instrucciones Para El Uso página 23

Notes:
The ASA 3000 is delivered with the DC
supply voltage for active antennas or
antenna boosters turned on. The two LEDs
DC FEED ANT A
up green.
If you use passive antennas only, the DC
supply voltage can be turned off. To do so,
remove the two input modules (siehe
"Exchanging
Seite 24) and set the two switches
ANT A and DC-Feed ANT B
"OFF".
Connecting the receivers
Up to eight receivers, e.g. EM 3031, or eight
twin receivers, e.g. EM 3032 or EM 3532, can be
connected.
Use BNC cables to connect the receivers to
the BNC sockets
First receiver:
Diversity section "A" to A1, diversity section
"B" to B1.
Second receiver:
Diversity section "A" to A2, diversity section
"B" to B2.
etc.
Putting the unit into operation
and DC FEED ANT B
the input modules"
and as follows:
light
auf
DC-Feed
to position
23