D - Configuration; Configuring The Camera And Adding It To The App - Avidsen IPC482-i Manual Del Usuario

D - CONFIGURATION

1 - CONFIGURING THE CAMERA AND
ADDING IT TO THE APP
Download and install the Aviwatch
the appstore or Google Play on your smartphone or
tablet, then launch the app.
Click on to add the camera
Then click "recherche wifi " (Scan WiFi) to add
your camera and scan the QRCODE, if accessible,
otherwise click "No QRCode? Click here"
10
EN
ROTATING 1080P IP WI-FI CAMERA
app from
Important: first connect your smartphone or tablet
to the WiFi network that your camera should be
using.
Not compatible with 5 GHz WiFi. The special
characters (#!»&@ etc.) in your security key as
well as the HT40 (40 MHz bandwidth) may lead to
configuration difficulties.
Please check the WiFi parameters of your box with
your internet service provider if you experience
connection difficulties.
After entering the password for the WiFi network
that the camera should be using, click on
"Appliquer" (Apply): your tablet or smartphone is
asking if the camera is accessible and if it is ready
to be configured.