FOLDING UP & UNFOLDING
NOTE : Ensure that the Power Switch is in the OFF position and the power cord is
unplugged from the electrical outlet.
FOLDING UP :
●Hold the rear end with one hand and then lift the deck up until the steel ball pops into the
Note: Check the Cylinder' pops' down into the locked position before moving the
treadmill.
UNFOLDING :
●Hold the rear end with one hand and then pull the cylinder to unfold the treadmill.
●Do not stand under the deck when unfolding the treadmill.
TO PREVENT ANY INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN
LIFTING UP OR SETTING DOWN THE DECK.