Maintenance / Care; Ec Declaration Of Conformity; Environmental Instructions - Würth 0891 106 3 Traducción Del Manual De Instrucciones De Servicio Original

Maintenance / Care

Disconnect the device from the air
supply before carrying out mainte-
nance work.
Unscrew the container in anti-clockwise direc-
■
tion.
Pour a sufficient amount of a suitable thinner for
■
the product used into the empty container.
Connect the device to the air supply again.
■
Spray the solvent into a special container until
■
the device is clean.
Note
Do not immerse the device completely
in the solvent; clean using a soft brush
or cloth.
Do not clean the components of the device
■
using wire brushes or sandpaper.
On no account should acids or alkaline
■
cleansing agents be used for cleaning.
After cleaning, maintenance and/or repair
■
work, check that all screws and nuts are se-
curely tightened.

Environmental Instructions

Do not throw the device away with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid
regulations.
In case of doubt, contact your waste disposal facil-
ity. Dispose of all packaging in an environmentally
sound manner.
10

EC Declaration of Conformity

We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 292-1
• EN 292-2
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Dept. PF
General Manager General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 03.02.2014